Asymmetric Sculpted Lampshade | Texture Series

If you want your own texture - feel free to dm me

This lampshade is part of a texture series based on the same asymmetrical sculpted form.

The goal of this design was to keep one elegant and modern silhouette, while exploring different surface finishes that completely change the character of the piece. Some versions feel soft and stone-like, others feel geometric, woven, fluid, or more decorative, but they all share the same overall shape and print-oriented structure.

The asymmetrical rim gives the lampshade a more artistic and architectural look compared to a standard symmetrical shade, making it suitable for modern, minimal, warm, and decorative interiors.

Texture variations included in this series

• Organic Stone
• Fine Grain
• Contour Wave
• Abstract Flow
• Pixel Weave
• Diamond Weave
• Chevron Flow
• Fluid Marble
• Interlaced Wave

Each variation uses the same core shape, but with a different surface language, allowing you to choose between a cleaner, softer, more geometric, or more expressive look.

Important note about print testing

The base shape has already been printed successfully, and some of the versions in this series were physically tested.

Other texture variants were created using the same print-oriented geometry and the same overall printing logic, and were prepared to behave similarly in print. However, not every single texture variation shown here has been physically printed yet.

Assembly

1. Fit the mount into the lampshade carefully and make sure it sits properly in place.
2.  Insert the bulb through the opening and screw it in securely.
3.  After assembly, check that the lampshade is centered and stable.
4. For a stronger connection between the mount and the printed part, a small amount of super glue is recommended.