T-shirt print - Cloud

👕 Iron-On 3D Printed T-Shirt Design

Create a unique heat-transfer design for your T-shirt using a 3D printed model.
The print is very thin and can be easily transferred onto fabric using a regular household iron.

This is a simple way to personalize clothing with your 3D printer.

🛠️ How to Apply the Print to a T-Shirt

1️⃣ Download the model and open it in Bambu Studio 💻

2️⃣ Print the model and carefully remove it from the build plate.
⚠️ The model is only 0.3 mm thick, so remove it slowly to avoid tearing.

3️⃣ Prepare your ironing setup

Place the T-shirt on an ironing board

Preheat your iron 🔥

4️⃣ Position the print on the desired spot on the T-shirt.
Cover it with baking/parchment paper to protect the model 📄

5️⃣ Press the hot iron onto the model for 15–20 seconds.
For larger designs, move the iron slowly and evenly across the surface ⏱️

6️⃣ Let it cool slightly, then remove the paper.
The print should stay attached to the fabric ✅

7️⃣ (Optional but recommended)
Turn the T-shirt inside out and iron the back side of the design for 5–10 seconds to improve durability 👕

⚙️ Print Settings

Printer: Bambu Lab printers (tested)
Slicer: Bambu Studio

Layer height: 0.2 mm
Walls: 1–2
Infill: 100%
Supports: No
Brim: Optional (recommended for very small models)

Material: PLA
Recommended colors: Any color depending on the design

⚠️ The model is very thin (0.3 mm), so handle it carefully when removing it from the build plate.

💡 Tips

Works best on cotton or cotton-blend fabrics

Use parchment/baking paper to protect the print while ironing

Apply even pressure with the iron for best results

!! If model is too thic - change 0,3mm to 0,4mm !!

⭐ If you like this model, consider leaving a Boost or Like — it really helps!