Orchid Wall Pot with Holder

This 3D-printed orchid pot is specially designed to directly accommodate standard plastic inner pots (e.g., from hardware stores or Kaufland) – no repotting necessary.

The inner pot is simply placed into the printed outer pot, fitting snugly and securely. Additionally, a suitable wall mount is included, allowing the pot to be attached to the wall in a space-saving and decorative manner.

The holder functions like a large eyelet: The pot is inserted from above and held securely. This creates a floating look, ideal for modern living spaces or as a green highlight on the wall.

The design is deliberately simple, so the focus is on the plant. The holder can be color-matched (e.g., green to match the leaves), while the pot can stand out visually.

🧩 Features:

• Suitable for standard orchid plastic pots
• No repotting necessary
• Wall mount included
• Easy assembly (adhesive or screws)
• Minimalist, modern design
• Space-saving wall solution

🛠️ Print Information:
Three variants are included in the slicer:

1. Only Holder (~3 hours print time)
2. Only Pot (~3 hours print time)
3. Pot + Holder combined (~6 hours print time)

Recommended: PLA or PETG depending on the application site.

🔧 Assembly:

1. Attach holder to the desired position on the wall
   • Option 1: With adhesive pads (e.g., mirror adhesive pads)
   • Option 2: Additionally or alternatively, secure with a screw in the middle
2. Leave orchid in its original plastic pot
3. Simply place the plastic pot into the printed outer pot
4. Hang the pot from above into the wall holder

Done – secure hold and clean appearance.

💡 Note:
The images shown may differ slightly from the final model, as minor optimizations (e.g., to curves) have been made.

😄 P.S.:
In my case, the whole thing was mounted in the Swabian way – glued to a mirror.

Result: buy one plant, see two. 😉