1:12 (6 inch) Action Figure Stand (No Hardware)

 1:12 Scale Locking Action Figure Stand 

This model combines the claw mechanism from the Skadis Locking Arm for Small Figures (originally from the Action Figure Stand for Marvel Legends scale) with the arm and base from the Dummy 13 Secure Locking Stand.

The goal was to create a stand specifically for 1:12 scale figures (6-inch) that uses a mechanical locking arm rather than just friction.

Features & Compatibility

• Scale: Optimized for Marvel Legends, Star Wars Black Series, and similar 6-inch lines.
• Mechanism: Uses the notched locking system from the Dummy 13 stand to prevent the arm from sagging under the weight of the figure. The design is also convenient because all hardware is printable meaning you don't need to worry about buying screws.

• Grip: Curved claw design improved upon from the previous claw to have a tighter more reliable fit.

  

  original (left)   improved (right)

• filament: I used Bambu PETG HF, but it should work fine with any PETG and likely ABS. I recommend avoiding PLA as it is not as durable and may break after multiple poses.
• print instructions: print with the bambu profile for your chosen filament. wall loops set to 3. I used default auto tree supports. and since some parts are thin I used a brim though that may not be necessary.  
• Assembly instructions: this project is fairly easy to assemble. You just screw the bolts into the holes to hold the notches together in your desired pose. the bolts may print a little tight I used pliers to tighten and untighten a few times and it loosened up.

Credits

• Claw Basis: Skadis Locking Arm for Small Figures / Action Figure Stand for Marvel Legends.
• Arm, Base, and locking mechanism : Dummy 13 Secure Locking Stand.