1/64 Mini Scene: Double Stop Coffee House
Print Profile(2)
Bill of Materials
Description
Sixth 1/64 Diorama Model: Double Berth Coffee Shop (Model for personal collection only, All rights reserved©No unauthorized commercial use)
Still rich in detail, recreating more realistic street scenes; suitable for 1/64 model enthusiasts;
Good news: [This time all are 0.4mm nozzles!!] However, manhole covers can be more detailed with a 0.2 nozzle, you can change it at your discretion;
Following Brick Wall Backstreet, Red Brick Corner, another coffee shop that can be arranged as a street scene has been completed, featuring two berths;
Now it can truly be connected to form a small town!
[About printing]
Supports and brim are included where needed, the file has been repeatedly tested and calibrated, print with confidence, do not modify!
BUT! Large bottom surfaces are prone to warping! Therefore it is strongly recommended to spray glue on the build plate! Spray glue! Spray glue!
The outer brim also has a chance of warping, the lifting force of the model's bottom surface can sometimes cause the bottom edge to separate from the brim, it's terrible, I used to trust brim so much, now I only trust glue!
If you don't spray glue, warping is highly likely to occur, leading to rough and deformed top surface details! (A painful lesson, just trust me!)
!!! If warping occurs due to not spraying glue, insufficient build plate temperature, or other personal reasons...
Don't come to me ahhhhhhhh!!!! And don't give me a one-star rating ahhhhhh!!!
[Other accessories]
1 Bambu Lab electronic candle (or other electronic candles of similar size)
[Painting tips]
1. Assemble according to the diagram, glue is needed (I'm sure you model experts don't need extra explanations, right,嗯);
2. The gilded color of the doorknob is painted with an acrylic marker, hold your breath, carefully, with the shakiest hand, draw the finest line;
3. Small parts like window glass require careful installation, I use model-specific gap-filling glue (Tamiya green cap)
4. It's more convenient to embed the window frame from the back of the wall (trust me)
Braised Toast's 3D Town [Under Construction...]
If you have any questions, feel free to provide feedback, I will continue to optimize and release new designs, thank you for your support!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)