Neckband Phone Holder - Free 3D Print Model

Search models, users, collections, and posts

hai45

Tools>Other Tools

IP Report

Print Profile(2)

All

P2S

H2S

H2C

A1 mini

X1 Carbon

P1S

X1E

H2D

H2D Pro

P1P

X2D

A2L

Supports are required, A1 mini printable

Designer

4.6 h

4 plates

4.7(15)

PETG 0.2mm layer, 4 walls, 25% infill

6.2 h

2 plates

4.7(3)

Open in Bambu Studio

Boost

1404

3560

898

552

Released

Description

Content has been automatically translated.

Show original

Used for neck-mounted phone photography, foldable, phone direction can be adjusted horizontally and vertically (the position shown in the image below can rotate, it needs a firm turn right after printing, the slider is used to lock the rotation direction),

The print has low strength, not very suitable for outdoor photography,

You need to prepare two rubber bands and super glue yourself,

The top neck-hanging part (shown in the image below) is connected with a 6 cm filament, apply super glue to both ends (this is a flexible connection part for large range of movement, you can use a suitable rubber hose for connection, which will provide a better user experience). Below, a filament can be inserted for fixation or super glue can be applied.

When using it, first hang the neck-hanging part (shown in the image above) around your neck, then clip the lower half onto it.

Boost Me (for free)

If you like the model, please give it a boost

2026.03.27 update, thanks to the friend from the international site for the photo feedback, I found that the neck-ring version was my old design, it was an upload error on my part, the old version had some uncomfortable dimensions and angles, I adjusted it too many times, so I made a mistake, I re-uploaded it, the original model has also been adjusted, here are the differences between the two

Phone Stand

photography

Neck Strap Mount

Comment & Rating (63)

@erobin1998

Thank you , thank you I have been looking for a print that would allow me to record my DIY/ crochet content handsfree …There wasn't clear instructions to put it together but zooming in on the images helped me figure it out hopefully my last picture can help others… One thing I dont understand is what is the purpose of putting a rubber band in the back that connects to the moving part but other than that I love this print

The designer has replied

@hai45

Thank you for your kind review, but I must apologize for this. After seeing your printed version, I found that the neck ring was my old version design. Because the structure was similar, I made a mistake when uploading it. The old version's size and angle were a bit off. I am now preparing to re-upload it. You can try my re-uploaded version of the neck ring

Show original

@user_4155283470

I have to know wtf you needed this for.

@BEOfficial

Personally, I could see me using this to record me painting miniatures, or other crafts.

@user_4155283470

Replying to @BEOfficial :

true say , I forgot how many people be recording them self these days

@BEOfficial

Replying to @user_4155283470 :

people want to share what they love doing with the world.

@gimkid

I have a few words for this idea: I am not yelling at the creator but rather at the fact this exists because LAZY YOU HAVE HANDS PHONE STANDS TRIPODS MAGNETIC MOUNTS GOPROS AND IF YOU CANT BE BOTHERED TO HOLD YOUR PHONE THEN YOU SHOULODNT HAVE IT

@camantha

this is for those of us that need both hands and to record. crochet, knitting, cooking, sewing, are some examples. some of the process is best shown with a first person POV to help understand the steps someone is taking.

@errigr

Why be rude? Just don't print it if you don't like it. Also not everyone has 2 hands. I could see it being useful for someone who's had a amputation or birth defect. Also useful for recording as @camantha said.

@adetech

It's not for a slacker, this is useful for creating content, you record at the same time you work, and you don't need to invest in other expensive devices, you just do it with your cell phone, humans take a year to learn to speak, and 80 to learn to shut up, familiarize yourself before issuing questionnaires

Show original

@Sonyyy_yoo

Good project, but i have one question: is this holder should rotate? On your photo looks like it does. And also what the purpose of this little thing below holder?

The designer has replied

@Sonyyy_yoo

Okay, i got it, it was hard to brake layers in it, but i did it! Great project

@hai45

Please rotate vigorously to separate the adhesion. It's normal if it feels a bit tight at first. When you can rotate it, you will naturally know how to use the small thing underneath.

@AlekseyChicago

Boosted

Print Profile

Supports are required, A1 mini printable

@felizanamello

Thank you, this is exactly what I was looking for. I do crafts with plaster and I don't like filming my face, only my hands making the pieces. I was reading some comments here and they are completely unnecessary, if you don't want it, you are not obliged to print it. Only those who need this file print it. Thank you very much creator of this beautiful work of art. 🙏🏻😀

The designer has replied

Show original

@hai45

You're welcome. It's great to be able to help you

@userbobtheman67

you dingdong why is your head blurred

@user_468072759

What's wrong with you smarty pants

Show original

@Landeniscool

bro my dad has neck problems and he’s gonna love this 🤣🤣🧀

@user_319808838

If the phone is heavy, your neck will hurt, and the filament on your neck is too weak, so it will just fall off...ㅠㅠ

The designer has replied

Show original

@hai45

Yes, I was thinking that if it were printed with softer tpu it might be more comfortable and less prone to breaking. You can leave a little extra filament to give it more room to move and apply glue at the joints to prevent detachment

Show original

@hai45

What if we try reinforcing it with glue

@user_561763431

Print Profile

PETG 0.2mm layer, 4 walls, 25% infill

The design works but certain aspects need improvement. In the base where the neck supports fit, they come loose, I think a latch or something similar should be added so this does not happen. The neck supports can easily be printed in one piece instead of being joined in half. Consider widening the base where it contacts the chest so it is not uncomfortable and also to give it stability. The design is great, I like it and I feel that with these improvements it would be a unique and perfect product. I loved the product, it was very useful for recording my Sim Racing videos. Thank you very much! we look forward to V2!

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Folding chair phone holder折叠椅手机支架

小厮工作室

519

278

手机支架 Mobile phone holder

太野造物

361

Phone Stand/Phone holder/手机支架

毒

639

313

hello Kitty手机支架

小奕是个大侠

101