Harry Potter Hogwarts House Robe Bookmark Set
Print Profile(4)
Description
Want to sell physical prints of this design?
Become an officially licensed SkyLab 3D seller here: The SkyLab 3D | Patreon
Hogwarts House Robes & Tie Bookmark Set
This bookmark set is inspired by the four iconic Hogwarts houses, featuring stylized designs of each house’s robes and signature tie. Each bookmark represents a different house with its recognizable colors and pattern:
- Ravenclaw – Blue and silver
- Hufflepuff – Yellow and black
- Gryffindor – Red and gold
- Slytherin – Green and silver
The design focuses on a clean, layered look that highlights the tie and robe collar, giving each bookmark a bold and instantly recognizable appearance. The contrast between the dark background and the house colors helps the details stand out while still printing cleanly.
Each bookmark is designed to be thin, durable, and functional, making them perfect for everyday use or as a themed set for display. Whether you print your own house or the full collection, they make a great addition for fans and readers alike.
Instructions:
Gryffindor-- (NOTE: I tried a couple different yellows and the Lemon Yellow works best. Others tend to "bleed" into the white more.)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x150mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.71997mm
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Scarlet Red
At layer #21 (1.44mm) swap to Lemon Yellow
At layer #25 (1.44mm) swap to White
--------------------------------------------------------------------------------------------------------
Slytherin--
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x150mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.71997mm
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Mistletoe Green
At layer #21 (1.44mm) swap to Light Gray
At layer #25 (1.44mm) swap to White
--------------------------------------------------------------------------------------------------------
Hufflepuff--
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x150mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.71997mm
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #21 (1.44mm) swap to Sunflower Yellow
At layer #25 (1.44mm) swap to White
--------------------------------------------------------------------------------------------------------
Ravenclaw--
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50x150mm in size
You may print at higher layer heights below the Base Thickness of 0.96mm
The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.71997mm
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Cobalt Blue
At layer #21 (1.44mm) swap to Silver
At layer #25 (1.44mm) swap to White
Boost Me (for free)
If you print this, I’d love to see your results — ratings and photos help me refine future designs and keep releasing more bookmarks.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)