Sticker Box Collection, 2026 World Cup

Sticker Organizer Box – World Cup 2026 - Box Collection
Customize the colors and assemble your special box collection
The originals are in the colors of the Brazilian flag

Organizer box developed to store World Cup 2026 stickers, focusing on practicality, printing efficiency, and material saving

The file includes multiple capacity versions, allowing you to choose the best option for your collection. The design follows an optimized technical concept, with adjustments to facilitate printing and daily use

🎯 Project Concept

The purpose of this model is to offer a simple, functional, and efficient solution:

• Optimized structure for printing
• Reduction of unnecessary supports
• Shorter print time
• Low filament consumption
• Easy assembly and use

⚙️ Print Optimizations

• Main body in a single piece (simple and fast printing)
• Lid with multi-color customization option (AMS needed only for the lid)
• Trophy printed separately and glued after assembly
• Geometry adjusted to reduce failures and rework

📐 Versions Included in the File

📁 Version for 500 stickers 📁 Version for 1200 stickers

⚠️ Note on capacity: Some users reported that the actual capacity might be slightly less than indicated. I haven't had the opportunity to test the full capacity of all versions, so take the numbers as an approximate reference, not an exact value

🧩 Assembly

1. Print the main body
2. Print the lid (with or without AMS)
3. Print the trophy separately
4. Attach the trophy with super glue (or similar)
5. Fit the lid

⚠️ Important Warning – First Layer (CRITICAL)

Some users reported first layer adhesion issues, especially with the lid's details (numbers, logos, and visual elements)

👉 To avoid failures, it is MANDATORY to review the color sequence in the slicer

🛠️ First Layer Configuration

In Bambu Studio or OrcaSlicer:

1. Go to the Others tab
2. Find First Layer Filament Sequence
3. Change from Automatic to Custom

✔️ Correct Order

• First: detail colors (numbers, logos, text)
• Last: lid background color

👉 This ensures that the details adhere directly to the bed and are "sealed" by the background color afterwards

🔍 Check Before Printing

After slicing:

• Go to preview
• Navigate to Layer 1
• Confirm that:
  • The numbers and text are printed first
  • The lid background comes after

🧪 Tips for Best Results

• 🧼 Clean the bed with isopropyl alcohol
• 🐢 Reduce the first layer speed (~15 mm/s)
• 🔥 Ensure good bed temperature
• 👀 Pay attention to the first minutes of printing

⚠️ Usage and Rights

• Exclusive use for hobby
• No commercial license
• This model references visual elements related to the World Cup:
  • I do not own rights to brands like FIFA or any official event symbols

💡 Final Considerations

Ideal project for those seeking:

• Practical sticker organization
• Easy printing even on basic setups
• Low production cost
• Thematic and functional look