Courtyard Garden Raised Bed Assembly Aid

We assembled raised garden beds from https://hofgarten-hochbeete.de/
The kits are good and easy to assemble. However, there are a lot of screws and nuts, and the included tool isn't the best

With these 3D prints, it becomes much easier
One of them looks like a nut. This is used so that the actual nut doesn't fall too deep into the tool. This way, it can be easily placed on the screw and held firmly right away
Without it, I always had to thread the nut onto the screw first and only then hold it
The hole of the 3D printed nut is large enough so the screw doesn't grip it

The other part allows the washer to be placed
This is the process:

• Insert nut into tool
• Place washer at the front
• Insert screw through
• Place tool
• Tighten

With presumably over a hundred screw connections, this saves a lot of time and effort

The tool's tolerances are probably rather generous, so it might be worthwhile to adjust the model yourself
My Fusion file is attached, in case you want to optimize it further

I printed it in PLA, and it survived one assembly well
It might be worth printing more than one copy, at least of the washer support