30mm boilie machine
Print Profile(1)
Bill of Materials
- Vis à tête fraisée M6 x 4: Longueur 30mm minimum
- Vis à tête fraisée M5 x 2: Longueur 30mm minimum
- Inserts filetés M6 x 4: à insérer à chaud dans la base de la machine
- Inserts filetés M5 x 2: à insérer à chaud dans la base de la machine
Description
Hello,
Here is my 30mm boilie rolling machine to print in PLA or PETG
Rolling capacity of 10 balls per turn
There are 5 plates for a total of about 50 hours of printing
For the base:
It is cut on two build plates. You just need to assemble them by gluing (I use two-component epoxy glue (like Araldite and it works very well)!
“”"Remember to activate supports for the base (the "classic auto" mode works very well)."""
For the rollers:
They are also cut into two "half shells" and laid flat for a cleaner print finish
You will also need to assemble them with a little glue
“”"no supports"""
For the flanges:
To be assembled by screwing. You will need to add screw-in inserts (M6 and M5) into the base and purchase M6/M5 30mm screws
“”"no supports"""
Once everything is printed, you will need to get:
- a 6mm square rod, at least 45cm long, to insert into the center of the assembled rollers ("oven spit" rods are perfect),
- You can easily find 6mm square tubing at your favorite DIY store. Adapt the end for connection to a drill, for example.
- some nuts,
- M6/M8 washers
- two 62*30*16 bearings (SKF 6206 type) to insert into the housing of the two flanges.
Once assembled, it is 38 cm long, allowing 24 15mm boilies to be produced with each roller turn
To be used with a screwdriver, a crank (to be made by you) or an adaptable motor
Another 36cm version is currently being designed
Also find in my Maker profile my roller conveyor for receiving the dough sausages, as well as my 20mm and 15mm machines
Motorization kit currently being designed
Feel free to leave your feedback and ideas in the comments to help improve the machine. All ideas are welcome :-)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)