Search models, users, collections, and posts
FLSUN V400 FYSETC Portable Input Shaper Mount
IP Report
Print Profile(2)
V1 0.16mm layer, 3 walls, 10% infill
Designer
30 min
1 plate
V2 0.16mm layer, 3 walls, 10% infill
Designer
31 min
1 plate
Open in Bambu Studio
Boost
1
2
0
0
9
2
Released
Description
Upgrading the hotend fan from the standard 4010 to 4020 makes it hard to attach the FYSETC Portable Input Shaper, as the fan cover can't be easily attached.
I've created this mount that is a snug fit below hotend and attaches to the aluminum mount.
I recommend printing in PETG as when fitted it's close to the heat block. 10% infill, 3-4 walls. No support needed. Print vertically.
Requirements: 2x M3*8 or M3*6 screws.
Optional: Double sided tape. Put on the inner side facing the aluminum mount to secure.
This is optional - the print is quite tide and a snug fit.
V1: Without the hotend screw hole.
V2: With the hotend screw hole.
Links:
- FYSETC Portable Input Shaper: Amazon1 | Amazon2 | Aliexpress
- 4020 Hotend Fan: Mouser
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)