A fully parametric furniture riser for beds, couches, and desks. Choose from rectangular, circular, or half-circle shapes, then dial in the top dimensions, base taper, wall lips, and height to fit your exact needs. All three shapes share a consistent tapered base that adds stability without bulk.
Using the MakerWorld Customizer
Click Configure on the model page to open the customizer panel. Adjust parameters in each section, then click Slice to generate your personalized riser ready for print.
Parameters
Common — applies to all shapes
Parameter
Description
shape
Rectangular, Circular, or Half Circle
base_extra
How much larger the base is than the top on each side (mm)
height
Total height of the riser (mm)
wall_thickness
Thickness of the lip walls (mm)
lip_height
How tall the lip stands above the top surface (mm)
Rectangular
Parameter
Description
top_width
Width of the top surface (mm)
top_depth
Depth of the top surface (mm)
edge_radius
Corner rounding radius (mm)
lip_front
Toggle the lip on the front edge
lip_back
Toggle the lip on the back edge
lip_left
Toggle the lip on the left edge
lip_right
Toggle the lip on the right edge
Circular
Parameter
Description
top_diameter
Diameter of the top surface (mm)
lip_cutout
Remove none, quarter, half, three quarters, or all of the lip ring
Half Circle
Parameter
Description
half_circ_diameter
Diameter of the curved end (mm)
half_circ_length
Length of the straight section from flat end to center of curve (mm)
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)