GoPro Hero DSLR Style Grip / Shutter

I saw someone on a group somewhere post complaining that someone had designed a 3D Printable Grip for the DJI Action 5 but not for the GoPro Hero Black, so I designed one. Thanks to that person, whoever you were.

This fits the Hero 9, 10, 11, 12, and 13 Black series. I have personally tested with a Hero 9 Black and Hero 13 Black to confirm functionality on those cameras.

For assembly, you need:

2 x M3 x 5 mm Brass Inserts
2 x M3 x 8 mm Screws
Superglue

You will benefit from additionally having:

1 x 2 x 18 mm Pin
1 x 0.3 x 4 x 15 mm spring
2 x M3 x 8 mm Knurled Thumb Screws (instead of the M3 Screws)

But these are not required!

The Shutter Lever connects to the Frame using either the 2mm pin or a piece of 1.75 mm filament, just clip the filament tight to the holes in the Frame.

The Shutter Lever MUST be printed with a fairly stiff material, avoid PETG and ABS. I used ABS-GF from Bambu Labs and regular PLA successfully. PLA-CF would probably be a great fit for this.

The spring is optional, and can make the shutter click back a little more firmly. Place it between the lever and the frame in the hole near the shutter button.

Add the 2 M3 brass inserts to the threaded holes.

The Camera retainer piece if really only necessary if you shake around the camera a lot, I couldn't really easily get the Hero 9 or 13 to fall out, but figured better safe than sorry.

I think other than that it's pretty straightforward to use! Happy printing, and feel free to ask questions if you have any!