V2 Starline Cupholder + V2 Bracket

This model is completely free but if you'd like to support me my Kofi is https://ko-fi.com/riggittapp

V2 Bracket now released, using incorporated countersinks and screw holes, eliminating the need for any drilling. Installation should be fairly simple. but I'll still be uploading a video with updated instructions. some instructions have changed, so please read CAREFULLY

I was unhappy with the options available as far as cupholders go and decided I needed to make my own.
I've got a video up on YouTube as an installation guide for the V1**, but rest assured it's pretty simple to install, and completely NON-DESTRUCTIVE

also, I would prefer if you posted any variations here on maker world to keep everything in one place.

PLEASE PLEASE PLEASE DOUBLE CHECK PRINT PROFILES AND SETTINGS.  I'M NOT A GENIUS AND YOU'LL LIKELY HAVE TO USE SOME OF YOUR OWN SETTINGS AND METHODS WHEN PRINTING.

PARTS LIST

1kg PETG, ASA, ABS
it's more like 700-800g but get a whole roll for testing.

Pla could probably be used in colder climates.

6-gauge drywall/wood screws fine thread V2 ONLY
2in 4 pcs. (bracket + big cupholder)

1⅝ in 2pcs. (small cupholder)

could use coarse of fine threads, I used fine and it turned out okay.

Mini Right-Angle Ratchet/Screwdriver

for threading the screw inside the cupholder into the bracket.

OPTIONAL RIGHT-ANGLE ADAPTER FOR DRILL

will save a hell of a lot of time threading the screws in the cupholders.

6-gauge drywall/wood screws**

2¼ in 2-4 pcs.
2in 2 pcs.

1⅝ in 2pcs.

Drill/Impact/Driver**

Any will do, so long as it can drive a screw into plastic.

Drill/Impact/Driver Bits**
5/64th bit for screw pilot holes.

3/8 or 1/2  bit for countersink in the bracket.

Phillips bit.

ONLY FOR V1 BRACKET**