Necromancers and Constructs (supportless pack)

Version 2: 

After some great user feedback, I have resculpted parts of the two Necromancer-models. A user experienced issues with the print failing at a point of the staff on one of the Necromancer-models, so to make sure they print well every time for every user, I've add more strength/mass to the staff and their contact points on both models. Thank you for being a great community that gives constructive feedback and help us make the best models possible! 😊

Necromancers and Constructs

Through forbidden rites, the necromancers call forth spirits that drift between worlds—restless echoes seeking shape. Each ritual circle of bone dust and sigils becomes a doorway, drawing these unseen entities into prepared vessels. Bound by runes of command, the spirits settle into forms of assembled bone: towering golems, drifting skull sentinels, and other hollow constructs. These creations are not simply animated remains—they are summoned beings, forced into service by the necromancers’ will. Obedient, tireless, and aware only of their master’s command, the constructs stand as proof of the necromancers’ mastery over both death and the unseen forces beyond it.

This model pack is scaled for boardgames, tabletops, TTRPG/RPGs and wargames of different types and consists of: 

• Two Necromancers (28mm base)
• Bone Golem (50mm base - medium creature size)
• Floating/Burning Skull (28mm base)

The Necromancers and the Floating Skull are also tested with 25mm and 32mm base size, so feel free to adjust if you prefer this base size as standard. 

All models are thoroughly tested in different sizes and with different nozzles. The sample models are always printed in Bambu Lab PLA Basic and 0.4mm, even though there are other filaments and nozzles more fitting for miniatures. This is to make sure the model holds up with most filaments and nozzles. I really hope you enjoy it as much as we did!

Disclaimer: 

The Floating Skull and Bone Golem is adapted for supportless printing with both 0.2mm and 0.4mm nozzles. The Necromancers are also printable with 0.2mm nozzle, but are a more demanding print with this nozzle than the 0.4mm. This is due to that their staff can be unstable and cause stringing or even "spaghetting" if your printer is not properly supported (to avoid excessive vibrations) and are more susceptible to stringing with filament that's not properly dry. If you are uncertain, I recommend printing them in 0.4mm or using supports. If you get “rough” areas on the model, this can also be caused by this, but can also be caused by a number of other factors like not having correct cooling or temperatur config for the filament used. 

Tips:

For a higher level of detail even with 0.4mm nozzle, you can activate “Variable Layer Height” for each model. 

In this sub-menu, you can choose to scale quality over speed and select a smoother finish. Maxing it for smoothness add some time to the printing process, but is usually well worth it. 

Dwarven Warrior (supportless) - Free 3D Print Model - MakerWorld

Dwarven Mines - Basic Carts and Rails - Free 3D Print Model - MakerWorld

Mountain Giant (supportless) - Free 3D Print Model - MakerWorld