SLICER BLADE GUARD
Print Profile(1)
Description
Simple, support-free print of a blade guard/base/deflector to install as a replacement on the slicer.
Attached and below are the measurements for its creation:
Print Time: approx. 0:30 h
Material Consumed: approx. 17 gr
Material Used: PLA Matte Green and Purple (the one currently loaded; but I recommend PETG at least)
Supports: /
Support Removal: /
Layer Height: 0.16 mm, perfect
Infill Density: 80%, for better resistance and durability over time.
Boost Me (for free)
If you like my creations, honor me with a Boost, follow me and ask me what you want!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)