Simple Compact Cap Gun
Print Profile(1)
Description
Simple cap gun I made inspired by this: Simplest toy cap gun - Free 3D Print Model - MakerWorld
Takes just over an hour to print, only 20g, Uses common cap gun caps.
Warning:
-It can be very loud
-Only use caps
Non Printed Parts:
-Short M3 screw or similar: Insert this into the striker.
-Compression Spring: I recommend a 0.6x7x40 mm spring but anything with a width of 7mm or less will work. I also got it to work by using springs from pens and stacking them.
Assembly:
-Line up the holes on the barrel and frame, then insert the pin through. Friction fit so it may be tricky.
-Insert the screw in the striker.
-Insert your spring(s) into the top of the frame.
-Insert the striker into the frame and latch it into the notch.
-Insert a cap into the barrel and close it.
-Flick the the notch up to fire.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (69)