PipMaker

cover

20260317_185033.jpg

20260317_185037.jpg

20260317_185046.jpg

20260317_185100.jpg

plate_1.png

aa91a2d88e00385c.jpg

Impostazioni di stampa;-0.2mm layer;-2 pareti;-10% riempimento (griglia);-impostare giuntura allineata;-realizzato in PLA.

Print settings;-0.2mm layer;-2 walls;-10% infill (grid);-set aligned seam;-made from PLA.

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Questo modello è un tessuto sintetico flessibile progettato per essere stampato come un pezzo unico direttamente sul piatto di stampa. Grazie a un sistema di incastri a tolleranza calibrata, i moduli si muovono liberamente subito dopo la rimozione, simulando il comportamento di una maglia metallica o di un tessuto tecnico.<ul style="list-style-type: disc"><li>Zero Supporti: Geometria ottimizzata con angoli di sbalzo entro i 45°.</li><li>Print-in-Place: Nessun assemblaggio richiesto. Lo stacchi e giochi.</li><li>Resistenza: Il design dei giunti è pensato per non separarsi nemmeno sotto tensione.</li><li>Stampa: Assicurarsi di aver pulito alla perfezione il piano di stampa.</li></ul><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you so much for the support ;)</boostcontent></boostme>

This model is a flexible synthetic fabric designed to be printed as a single piece directly on the print bed. Thanks to a calibrated tolerance interlocking system, the modules move freely immediately after removal, simulating the behavior of a metallic mesh or a technical fabric.<ul style="list-style-type: disc"><li>Zero Supports: Optimized geometry with overhang angles within 45°.</li><li>Print-in-Place: No assembly required. You detach it and play.</li><li>Resistance: The joint design is intended not to separate even under tension.</li><li>Printing: Make sure the print bed is perfectly clean.</li></ul><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you so much for the support ;)</boostcontent></boostme>

Print Profile(1)

Bill of Materials

Description

Comment & Rating (7)

License