Soap box SHAMPOO BAR Störtebekker or <68x68x23

Soap box for SHAMPOO BAR suitable for Störtebekker or soaps 68mmx68mmx23mm

Storage box for solid shampoo intended for Störtebekker or other soaps with suitable dimensions or smaller.

The bottom part can simply be placed in the shower, and as soon as you travel, the lid can be put on.

Lid and bottom part hold firmly together by clipping the tabs, and the lid does not fall off.

I have various versions in the 3MF file.

1. Box with colored lettering 'SHAMPOO BAR'
2. Box with colored lettering 'SHAMPOO BAR' - A support material is used for the support interface layer - PLA can also simply be used as a support layer when printing with PETG (when printing with PLA, PETG can then be used as an interface layer), which makes the support structures easier to remove.
3. Box with embossed 'SHAMPOO BAR' - Single-color print
4. Box with embossed 'SHAMPOO BAR' - Single-color print - A support material is used for the support interface layer (See point 2)
5. Box without embossing - Single-color print
6. Box without embossing - Single-color print - Single-color print - A support material is used for the support interface layer (See point 2)

I would recommend printing in PETG due to its water resistance.

Have fun printing & traveling - I would be happy to see pictures of your printed boxes ;)