Fiido C11 Pro Battery Hanger

A hook to suspend your Fiido C11 Pro bike battery.

I used it to hang up my battery on my entry lobby cabinet, to make it quickly available/reachable when I'm ready to go.

To assemble the upper hook, you'll need:

• M4x8 countersunk screws (x2)
• M4 bolts (x2)

To fix the whole hook (bottom and upper parts) you'll need 8 countersunk screws (diam. 5mm).

*******************

* SECURITY NOTICE: *

*******************

The battery is pretty heavy (almost 4Kg).

Be sure to print this hook with a sturdy material (PETG, PTEG-CF, or even better ABS).

That's particularly important for the bottom part which receive most of the battery weigh.

If the hook comes to break, the battery could fall and suffer a significant impact.

In the worst case scenario, it could end up by starting a chemical fire which is almost impossible to extinguish with domestic means.

I will not be held liable in the event of an incident.

Use at your own risks.

***********************************************

For a Xiaomi Smart bike (QiClycle) battery hook, see my model here: