Search models, users, collections, and posts

Galaxy S26, S26 Plus and S26 Ultra TPU cases

Victronix
Tools>Gadgets
IP Report

Print Profile(2)

All
X1 Carbon
P1P
A1 mini
H2C
P1S
X1
X1E
H2D Pro
H2S
P2S
H2D
A1
X2D
A2L
0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
3.4 h
1 plate
Bridging/Sagging Fix With minimal supports
Bridging/Sagging Fix With minimal supports
3.4 h
1 plate
5.0(3)
Open in Bambu Studio
Boost
29
63
17
0
210
88
Released 

Description

Galaxy S26, S26 Plus and S26 Ultra cases. Print in TPU of your choice with SNUG type support at 30 degree overhand threshold. These models are based on official 3d models from Samsung and have 0.2 mm clearance around the phones.

If you like my work, consider buying me a coffee https://ko-fi.com/elektronchika

case
Samsung
galaxy
tpu
samsunggalaxy
tpucase
s26
galaxys26plus
s26plus
s26ultra
galaxys26ultra
galaxys26

Comment & Rating (17)

(0/1000)
@eier1188
So i fixed the Sagging, I noticed that the edge that goes over the top part of the phone is being printed over thin air, so adjust 2 settings to fix it. Quality>Advanced: Print Infil First, and Thick Bridges. I added the print profile with this fix as well as minimal supports over build plate only to fix the charging port sagging
1
Reply
@3DDDeez
can you share you print profile? i didn't see it when I went to your page.
0
Reply
@eier1188
Replying to @3DDDeez :
It's not on my page, it's on this one.
0
Reply
@3DDDeez
Replying to @eier1188 :
oh that's fantastic. i see it now but only because you told me. i don't see how it is connected to you. usually I see "print profile" next to the names of people who comment but that's it. did the original creator add it like that?
0
Reply
@Sycophant
Printed without a top or bottom. Came out ok. A little bit of sag on the sides.
0
Reply
@eier1188
I had the same thing happen to me. I printed another one for a co-worker and made some adjustments and it worked! I posted about it here, also I uploaded the fixed print profile. Though I doubt you'll reprint it, but if you do try checking these two settings -> Quality>Advanced: Print Infil First, and Thick Bridges. also "allow supports" "on build plate only" to fix charging port sagging.
1
Reply
@Sycophant
Replying to @eier1188 :
Amazing, I will check this out thank you!
0
Reply
@user_1111037087
Printed the S26 base model. Fits perfectly, I've used @eier1188 tips and no sagging. Thanks eier1188 and thanks to Victronix the creator of the model.
1
Reply
@alparo
Where do you find s26 base and plus models? I can only see ultra model in both print profiles here.
0
Reply
@ShortyWahp
I dont know if I'm missing something or what.. Where can I find the file for the S26+?
0
Reply
@urbru3d
Print Profile
Bridging/Sagging Fix With minimal supports
0
Reply
@PassionateThug
Print Profile
Bridging/Sagging Fix With minimal supports
0
Reply
@Ruben3d
Print Profile
Bridging/Sagging Fix With minimal supports
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

The Perfect TPU profile
The Perfect TPU profile
AllFor3D
23.8 k
5.3 k
Galaxy s26 TPU Case
Galaxy s26 TPU Case
jim
243
36
iPhone 17 PRO / Max / Air 3D Models (With AMS!)
iPhone 17 PRO / Max / Air 3D Models (With AMS!)
MB Studio
19.5 k
3.9 k
Ultra Long-Spin Top – Engineered for Max Rotation
Ultra Long-Spin Top – Engineered for Max Rotation
UniversalMaker
21.8 k
4.9 k