Asirpa - Golden Kamuy - ChromaLink

ChromaLink Hex Wallart for Escape from Tarkov Character “Killa”, based on the ingame Poster of Killa and Tagilla.

Based on the ChromaLink Base System from the Creator “Superseaslug”

Below are the default Hueforge instructions, add 18 layers to the swap instruction as the ChromaLink base is 18 layers high.

As the print uses more than 4 colors, you need to manually change filaments in the AMS midprint. (or you have more than one AMS)

For example, black and blue are the first colors. After they completed, I just removed them from the AMS and replaced them with Orange and White accordingly. Make sure you assign the 5th and 6th color black and blue accordingly.

The Model is 216.46x250mm in size

You may print at higher layer heights below the Base Thickness of 0.16mm
The Max allowed Thickness is 1.92mm and the Actual Thickness is 1.92mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #00358e PLA BambuLab Basic Blue  Transmission Distance: 4
    #7f5039 PLA+ Elegoo Brown  Transmission Distance: 1.7
    #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5
    #f99963 PLA BambuLab Matte Mandarin Orange  Transmission Distance: 3
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #4 (0.4mm) swap to Blue
    At layer #9 (0.8mm) swap to Brown
    At layer #13 (1.12mm) swap to Ash Gray
    At layer #16 (1.36mm) swap to Mandarin Orange
    At layer #17 (1.44mm) swap to Jade White for the rest.