Acoustic Panel Clamp Screw/Nut
Print Profile(1)
Description
Clip/thread for acoustic panels for attaching additional accessories
I also didn't want to drill into the boards and attach hooks as a wardrobe over the grooves.
Clip width: 11 mm (thus also fits many models)
Height: 10 mm
I noticed with Momento acoustic panels that the wooden strips here are glued instead of stapled or other alternative methods.
Due to the adhesive, I could not use the long, pre-made clamps on MakerWorld.
I couldn't screw them in.
So I designed my own version that clamps only 5 mm behind the panels, which is perfectly sufficient.
Either counter with an M3 nut from behind and use M3 standard thread or M3.5/M4 self-tapping screws.
Print without support and 5 min per clip
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)