Radxa Rock 5B+ Case (Screwless)
Print Profile(1)
Description
This case features a screwless design, with the upper and lower parts installed using a snap-fit structure. No supports needed when printing, it has been tested and verified on Bambu Lab A1 using Bambu Lab PLA Basic filament.
The case is divided into upper and lower parts, it is recommended to print them separately.
The default 3MF contains the version shown in the first physical photo, with strip-shaped heat dissipation holes and an open M.2 slot in the lower part, the top part has no heat dissipation holes on the top surface and features the text "Rock 5B+". Other versions can be viewed by directly downloading the STL files.
Regarding overly bright LED lights, the LED position is not holed by default but is thinned. If you need to make holes, you can refer to the image below and use a small screwdriver. Note: Remove the board before making holes to prevent damage to components!
Regarding the Maskrom button, there is a hole on the side. You can use a toothpick (do not use metal conductive tools like tweezers) to enter Maskrom mode without opening the case.
If you need to enhance the heat dissipation effect of the bottom, you can refer to the image below and purchase footpads to attach them yourself.
Previews of each version are as follows:
Rock-5B+_Bottom_Slot_M2.STL
Rock-5B+_Bottom_Slot.STL
Rock-5B+_Bottom_Hexagon_M2.STL
Rock-5B+_Bottom_Hexagon.STL
Rock-5B+_Top_Slot_Character.STL
Rock-5B+_Top_Slot.STL
Rock-5B+_Top_Slot_Flat.STL
Rock-5B+_Top_Hexagon.STL
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)