Hueforge Marsimoto
Print Profile(1)
Description
Hello,
here is my Hueforge Marsimoto.
Have fun printing.
Printing instructions:
Print at 100% infill with a layer height of 0.08mm. With a base layer of 0.16mm
The model is 133.33x200mm in size
You can print in higher layer heights below the base thickness of 0.64mm
The maximum thickness is 2.96mm and the actual thickness is 2.08mm
Start with Bambulab black
From layer 8 Bambulab Mistletoe Green
From layer 9 BambuLab Green
From layer 15 1BambuLab Light Green
From layer 18 BambuLab Jade White for the rest
This is already pre-configured in the file.
With only one AMS:
Place the first 4 colors (black, Mistletoe Green, Green, light green) into the AMS and assign the respective color to the AMS slot at the start of printing.
The white filament gets the same AMS slot as the black filament.
After printing with the black filament is finished, insert a pause in the print. Here, swap the black filament with the white filament in the AMS.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)