Jumbo Roll Holder

The perfect balance between decoration and utility! I have redesigned the bunny tray, modifying it and adding a reinforced central axis to convert it into a kitchen roll holder for Jumbo sizes.

The advantage of this design lies in its exceptional stability, preventing the holder from moving or tipping over when pulling paper. Additionally, it adapts to the design of most commercial jumbo rolls.

• Functional Remix: Based on the decorative tray design, now with a practical purpose.
• XL Capacity: The central post is tall and robust enough for professional/Jumbo sized rolls.
• Superior Stability: Thanks to the diameter of the original tray, the center of gravity is low and secure.
• Optimized for A1: Designed to take advantage of the Bambu Lab A1's print area (256x256mm).

Tips for a perfect result:

1. Adhesion: Make sure your PEI plate is thoroughly clean (water and soap or isopropyl alcohol). As it has a wide base, good adhesion is key to preventing warping at the corners.
2. Material: PLA Silk gives the bunnies a beautiful ceramic finish, but PLA Basic or Matte are ideal for a more modern and clean look.
3. Speed: On the A1, accelerations are high. If you notice the tube vibrating a lot when reaching the upper layers, you can slightly reduce the speed of the "Outer walls" in that area.

This design is made for the community. If you print it, please upload a photo of your result and rate the model. It helps me a lot to keep improving my designs!