Solo Leveling HueForge
Print Profile(1)
Description
I’m new to 3D modeling and still learning. If you find any problems or have ideas on how to improve the design, please let me know. Feedback is always welcome!
This model was my early work so the model is Thick
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.54x200mm in size
You may print at higher layer heights below the Base Thickness of 1.52mm
The Max allowed Thickness is 3.28mm and the Actual Thickness is 3.26069mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#8d50bc PLA Copymaster 3D Perfect Purple Transmission Distance: 3.1
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #32 (2.64mm) swap to Perfect Purple
At layer #34 (2.8mm) swap to Jade White
At layer #37 (3.04mm) swap to Perfect Purple for the rest.
Setting
Layer height: 0.08
Initial Layer height: 0.16
Wall: 2
Sparse infill density: 100%
Sparse infill pattern: Rectilinear
Turn Off Prime Tower
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)