UNO Card Case - Free 3D Print Model

Search models, users, collections, and posts

3D_Stuff

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

P2S

P1P

X2D

X1E

H2D Pro

P1S

H2C

A1 mini

X1 Carbon

H2S

H2D

A2L

PLA | UNO Card Case

Designer

1.2 h

1 plate

4.8(58)

PLA | Printed dowel pins

Designer

9 min

1 plate

4.9(17)

Open in Bambu Studio

Boost

656

2226

2 k

1.5 k

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

3x35 mm Stainless Steel Dowel Pins (5PCS) - DA023

D3 Stainless Steel Dowel Pins

Description

This card box is designed for UNO cards up to 56,5 × 87,5 mm, with a maximum deck height of 34 mm. The cards are securely held in place by a locking lid while remaining easy to access.

The lid uses a 3 × 35 mm dowel pin, which should be carefully press-fitted or gently tapped in with a hammer. Filaments with poor layer adhesion may split during assembly, so caution is advised. PLA Basic has been tested successfully.

The latch is inserted into the slot in the lid. Depending on print quality, a small amount of sanding may be needed for a smooth fit.
Because the pin is slightly shorter than the width of the lid, it should be pressed in from the center using a smaller pin or a screw. This prevents it from sticking out on one side. This is purely cosmetic and does not affect functionality.

Boost Me (for free)

If you enjoy my work and want to support what I do, feel free to like, comment, subscribe, or give it a boost. Thank you!

Membership

If you like this model and want to sell printed versions, check out my Commercial License.

Join

Comment & Rating (93)

@andrewduttine

Print Profile

PLA | UNO Card Case

very good print. going to use it a lot! I would’ve put 5 stars but the lock is very fiddly and comes off easily. if you fixed that, this would be 5 stars. great print though!

(Edited)

The profile uploader has replied

@3D_Stuff

In my first prototypes of the lock, it was very hard to press in and there was a risk of breaking the small part. Because of that and because of varying tolerances, I made it a bit looser. But of course, it should not come off while using the part. Maybe you can fix it with some glue, or by melting a piece of filament and putting a small amount of molten plastic between the lid and the lock. I’ll take another look at the mechanism and maybe find a better solution for a new lid version.

(Edited)

@3D_Stuff

I’ve designed a new lock that should work better

(Edited)

@user_681778669

Just simple and perfect, thank you.

@EllaKrekel7

Print Profile

PLA | UNO Card Case

Printed it twice right away. Exact fit, stable and nothing falls out. Perfect

Show original

@OmgItzJamieBro

Print Profile

PLA | Printed dowel pins

Thank you excellent

@user_3894929345

Loved this, can you help me to make it a bit bigger? I have 3 stacks of cards for UNO No mercy, and want to print it? Thanks!

The designer has replied

@3D_Stuff

Sure, how big is your deck in total?

@user_3894929345

Replying to @3D_Stuff :

Thanks for the quick reply! Deck height of 56mm instead of your 34mm

@3D_Stuff

Replying to @user_3894929345 :

I added it to the download section, but I can’t guarantee that it will look good since it is very wide.

@cutisnweton347

Print Profile

PLA | UNO Card Case

sehr cool 😎

@user_1544056714

Print Profile

PLA | UNO Card Case

@user_2674618655

Print Profile

PLA | UNO Card Case

@Harrymac2014

nice fits so snug only thing I would say is make the hinge smaller so you can use filament to do the hinge

The designer has replied

@3D_Stuff

It’s a good idea overall, but I think it may be difficult to achieve the right tolerances for the hinge to work properly. However, I might be able to add a 3D-printed pin that can replace the steel one.

@Harrymac2014

yes because I used 1 bit of filament and I halved a second bit of filament and it worked perfect

@OmgItzJamieBro

Print Profile

PLA | UNO Card Case

Exactly what we needed!!!

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Throwing card

Andrew Brown

23.5 k

6.6 k

Jeep Kit Card

agepbiz

70.9 k

22 k

Cascade card wallet V2

Hugo

53.4 k

13.9 k

GIF

Golf MK1 - Kit Card

Kocyns

34.3 k

15 k