Perler Bead Pen, Press-type dispenser for 2.6mm diameter beads (one bead per press), with bead quantity window and storage compartment. Bead pen bead needle zc002

The creation results are strictly protected by copyright laws and regulations. Any action without explicit permission is prohibited for commercial activities.

If you have commercial use needs, including but not limited to reproduction, distribution, public display, and sale, please contact the creator in a timely manner to handle authorization matters.

Thank you sincerely for respecting intellectual property rights and for your strong support of my creative work!

💐 Six elements for successful printing: 1. Clean the print plate with dish soap + hot water; 2. Dry damp filament; 3. Apply glue to the print plate if necessary; 4. Calibrate the printer regularly; 5. Continue reading the instructions on this page; 6. Wear gloves when removing the model.

⚠️This Perler bead pen is only suitable for 2.6mm diameter beads. Not suitable for 5mm and 10mm diameter beads⚠️

March 20, 2026: V5 version update: Added screw fixing holes, black [M3x8 screw] from the maker's starter kit, optimized internal structure details. Update note: Please do not reuse deformed beads, as they may get stuck. After the V5 version, the update frequency will decrease.

March 17, 2026: V4 version update: Enlarged bead exit, improved bead dispensing smoothness

[Perler Bead Pen for 2.6mm Diameter Beads] Press-type dispenser with bead quantity window (one bead per press) and bead storage compartment

Required materials: 1 spring from the maker's starter kit (specifications: 0.5x5x25mm). Cut the spring to 9-10mm with needle-nose pliers. The V5 version requires 1 black screw from the maker's starter kit, as shown below:

Installation Guide: (Key Points)

1. Remove external supports;

2. Check if the internal bead channel has stringing and if it is clear (Important);

3. Install the button and install the spring all the way to the bottom [Install all the way to the bottom];

4. Assemble the front and back covers (For V3, V4, the front and back covers can be fixed with masking tape/super glue/cable ties) (For V5, use 1 black screw from the maker's starter kit to fix);

5. Place beads into the top cover and shake the pen body (bead loading process)

💐You can also check out my other 2 interesting works, which use the official Bambu Lab candle light: (Click on the blue text or image to jump)

Dragon Ball Goku Table Shadow Lamp 37g Jumping Goku Projection Lamp

Zoro Roronoa Table Shadow Lamp 34g filament Projection Lamp One Piece Zoro Character Lamp Bambu Lab Candle Light

👉Visit my homepage and 🔍 discover more amazing designs!

⬇️Xiaoshutong's Collections⬇️

【Most Popular Collections in China】（👈Click to jump to the international station collection）

【Most Popular Collections】（👈Click to jump to the China station collection）

【Must-have Accessories for Bambu Lab】（👈Click to jump to the China station collection）

【Toy Collection】（👈Click to jump to the China station collection）

【Home/Office/Study Essentials】（👈Click to jump to the China station collection）

⬇️Xiaoshutong's Recommended Designs for 2026⬇️ Please search on Xiaoshutong's homepage

2027 Auspicious Year of the Dragon 【Dynamic Red Envelope】⭐️

X2D, P2S High-Efficiency Silicone Wiper Module 【Solves messy filament】⭐️

Functional Phone and Tablet Stand 【Magnetic Triplet】⭐️