Caption jack sparrow Hueforge

Project: Caption jack sparrow.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 259.7x461.54mm in size

You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.4mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #f2306e PLA PolyLite Magenta  Transmission Distance: 1
    #39b9db PLA PolyLite Aqua Blue  Transmission Distance: 2.5
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #a6a9aa PLA BambuLab Basic Silver  Transmission Distance: 0.5
    #e7ceb5 PLA BambuLab Basic Beige  Transmission Distance: 8
    #ffffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.5
This print uses 7 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #3 (0.4mm) swap to PolyLite Magenta
    At layer #9 (0.88mm) swap to PolyLite Aqua Blue
    At layer #13 (1.2mm) swap to PolyLite Black
    At layer #16 (1.44mm) swap to BambuLab Basic Blue Gray
    At layer #20 (1.76mm) swap to BambuLab Basic Silver
    At layer #21 (1.84mm) swap to BambuLab Basic Beige
    At layer #23 (2mm) swap to BambuLab Matte Ivory White for the rest.