Wall mount for PLA parts (11x14.5x9.3)
Print Profile(1)
Bill of Materials
- Dübel x 1: D5 x 29
- Spanplattenschraube 3,0x25 T10 x 1: Torx T10, Kopf hat ca D=5,8mm
Description
I couldn't find a wall mount to attach individually printed letters with a small gap to the wall, so I tried to design something and share it here for others, as I'm actually quite proud of my first make :)
The workpiece part must be glued to the part to be attached with a PLA adhesive or cyanoacrylate-based superglue.
Then clamp the wall piece into the counterpart
Now stick a piece of double-sided adhesive tape to the back of the wall piece
After aligning the position with the component, briefly and firmly press the adhesive tape against the wall and release the wedging upwards
Now the wall piece should sit exactly where it needs to be screwed to the wall
Just mark briefly, remove the wall piece from the wall again and drill with a D=5.0mm drill for the dowel.
The rest should explain itself.
I have included the dowels and screws used in the pictures.
If you like the mount, I would be very happy about a boost ;)
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)