Plaster/Paint Mixer With and Without Shaft
Print Profile(1)
Description
This is a drill mixer designed for mixing plaster or paint without entraining air into the mixture.
One version has a 6.5mm hole for attachment to a ¼" inch steel rod or threaded rod. This hole is intentionally tight for a good fit that won't slip. It may need to be reamed out slightly with a drill bit depending on your use. I have heated the end of the steel rod slightly to seat it and then secured it with a drop of superglue. Threaded rod could be used with a nut on either side of the mixer.
The second version has an integrated hexagonal shaft 8.5mm in width.
Mix slowly. Rinse mixer immediately after use as it is difficult to clean
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)