Cycling Accesories Wall Station
Print Profile(3)
Bill of Materials
- Wahoo or Garmin Supports x 2: https://amzn.eu/d/0g8i9Ql1
Description
UPDATE as 03/06/2026
Added 2 new print profiles for adapters, one for SPD Cleats and another one for flat sole shoes, both uses same magnets as the base for quick attachment
NOTE: If you printed this base before 03 of June 2026, I will upload 1 different SPD and Flat Sole attachment profile since the tolerances changed a little, if you are printing after 03/06/2026, you will be fine…
Cycling Accesories Wall Station
DESCRIPTION
Keep your "Pain Cave" or garage organized with this All-in-One Cycling Wall Station. Designed by a cyclist for cyclists, this compact organizer holds everything you need for your next ride in one single spot. No more searching for your heart rate strap or charging your lights in different places.
Key Features:
• Front Helmet Hook: Dedicated sturdy hook for your helmet.
• Side Shoe Racks: Two integrated side platforms to hold your cycling shoes by the cleat with magents.
• Top Storage Tray: Perfect for your heart rate monitor, multi-tools, keys, or cycling cap, gels, etc.
• Accessory Mounts: Front-facing area compatible with standard quarter-turn mounts (Garmin/Wahoo) for your computer, lights or radar.
• Hex-Ventilated Back and Sides: The stylish honeycomb pattern ensures your gear (like gloves or straps) stays ventilated while saving filament.
• Easy Mounting: Features two reinforced keyhole slots on the back for secure wall installation with standard screws.
WHAT DOES IT INCLUDE?
Very easy to print model…
WHAT ELSE DO I NEED?
I used PETG HF, but could you could use PLA without any issues.
PETG HF Filament, color of your choice
2 10x3 Magnets
2 Wahoo or Garmin adapters
WHAT TO EXPECT?
This base was designed to be minimalistic but whit a lot of space to store your helmet, shoes, sunglasses, HRM, computer, radar, gloves, gels, snacks etc.
How to mount it?
Installation:
1. Use the back of the organizer as a template to mark your screw holes.
2. Install two wall anchors/screws (ensure they are level).
3. Slide the organizer onto the screw heads using the keyhole slots.
4. Load your gear and get ready to ride!
PRINT SETTINGS
Material: PLA, PETG HF, ABS, ASA
Walls: 3
Layer Height: 0.24 mm
Infill: 10% Adaptive Cubic
Support: Enabled, Tree Slim
The profile has all the settings dialled in so you would not encounter any issues with it
Hope you find this model useful as I did, and the best is quite easy to print, and you will save a lot of money!!
There are no instructions since the mounting is quite forward.
SUPPORT MY WORK:
If you like and find useful my designs, a Boost or a high quality photo/review of your print is always welcome, and means very much to me.
Boost Me (for free)
Enjoy this design, consider giving me a boost or upload a photo of your print, I would really appreciate it!!!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (4)