2x4 Work Bench or Shelf Leg Protectors

Protect the end of your 2x4 work bench or shelf legs.  Prevents the board from absorbing any moisture from the ground and also splintering if you slide it over the ground.

Note that 2x4's are not a precision milled board and can vary dimensionally.  I iterated a few times to end up with a nice friction fit, but a different lot of boards could make the fit loose or tighter to the point where you may need to slightly scale the model.  In most cases scaling by 1% bigger or smaller will be sufficient.

This model is for a single stand alone 2x4.  If you have two 2x4's screwed together perpendicular to one another making a “L” shape for added strength check out this file for leg protectors: 2x4 Work Bench or Shelf Leg Protectors "L" Shaped - Free 3D Print Model - MakerWorld

Into wood working, check out some of my other popular models:

90 degree corner sander: 90 degree corner sanding block - Free 3D Print Model - MakerWorld

Blade protector: 10" saw blade protector - Free 3D Print Model - MakerWorld

Clamp support block: Parallel clamp support block - Free 3D Print Model - MakerWorld

Drill bit depth gauge: Drill Bit Depth Stop Gauge - Free 3D Print Model - MakerWorld

Ratchet strap saver: 1" Ratchet strap saver corner - Free 3D Print Model - MakerWorld

Drill guide: Drill guide for edges, angles, and rounds - Free 3D Print Model - MakerWorld

Gap measurement: Gap Measurement Tool - Free 3D Print Model - MakerWorld

Glue spatula: 2 sided glue spatula - Free 3D Print Model - MakerWorld

Click my name to check out my other wood working tools and give me a follow so you don't miss out on future models!