PRANK TEST CUBE trick your friends

The ultimate prank for the 3D printing perfectionist in your life. This model looks like a standard 20mm calibration cube at a distance, but it has been mathematically designed to be impossible to print "correctly."

The Prank:

• Built-in Skew: The cube is modeled with a slight tilt. No matter how much they square their frame, it will always look crooked.
• The Letter Trap: The X, Y, and Z letters are modeled off-center and at weird angles. They’ll spend hours adjusting belt tension and motor steps trying to "fix" the tilted letters.
• Caliper Chaos: The dimensions are intentionally uneven (e.g., 20.4mm on one side, 19.6mm on the other). They will go crazy trying to calibrate their E-steps.
• The "Warped" Top: The Z-face is modeled on a slope, making them think their bed is permanently warped.

How to use it:
Send this to a friend who is obsessed with print quality or upload it as an "Ultra-Precision" tool. Watch them take their entire printer apart trying to fix "errors" that are actually built into the STL! but if you are a nice friend tell them before they take their printer apart!

I'm not responsible for anyone breaking their 3D printer (if they can't put it back together) 

I hope you can print it (or your friend)

Thanks for checking out my model! I’m trying to reach 200 followers to qualify for the Commercial License Membership. If you enjoy my designs, a follow really helps.

please check out my most recent design!