Washer & Spacer Assortment Generator (DIN Presets)

Print your own metric or fully custom washers, spacers, and standoffs. One piece or a complete assortment in a single print. Select a metric size (M2 - M10) and the bore and outer diameter are set automatically based on DIN standards or go full custom. Just set the height and hit print.

Two modes:

• Single: One size, one or more identical copies on the build plate
• Assortment: Define a height range and step size, and the model generates a full set automatically in a compact grid layout. Need two of each? Set copies per size.

Metric presets with DIN dimensions: M2, M2.5, M3, M4, M5, M6, M8, M10 - inner bore and outer diameter based on DIN 125 (standard) or DIN 9021 (large/fender). Hex shape uses DIN 934 wrench sizes. Or switch to Custom for any dimension.

Key features:

• Four independent chamfers: outer top/bottom and bore top/bottom
• Hex outer shape with correct wrench sizes for anti-rotation or press-fit use
• Assortment mode with configurable range, step size, and copies per size
• Compact grid layout, always centered on the build plate
• Auto-clamping: all dimensions stay valid, no broken geometry

Use cases: Washers, spacers, standoffs, shims, bushings, PCB standoffs, cable spacers, furniture bumpers, or build a complete hardware drawer with exactly the sizes you need.

All parameters are fully exposed in the Makerworld Customizer.