LILYGO TTGO T3 LoRa32 V1.6.1 Case + USR Button
Print Profile(1)
Description
This model is specifically designed for the LILYGO TTGO T3 LoRa32 V1.6.1 hardware. An optional USR button can be added. For the USR button, a 6 × 3,5 mm – 4.3 mm tact switch can be used. The button connection pins are indicated in the images
To use the button feature, the appropriate firmware file must be downloaded and compiled from the relevant source
The model also includes blank (patternless) versions of the front and back covers. This allows you to easily add your own texts, logos, or patterns onto the covers using your slicer software
This product is for personal use. Commercial use is prohibited
Customization can be made to the model, and it can be shared provided that attribution is given and the same license terms are maintained
Sharing on another platform is prohibited. All rights reserved
A 103450 type Li-ion battery is used for the device
Required Screws
- 4 pieces M3 × 20 mm screws
- 4 pieces M3 nuts
- 4 small screws of appropriate size for PCB mounting
Double-sided tape can be used to reduce wobble that may occur between the battery and the back cover
Recommended Print Settings
- Material: PLA
- Wall count: 4
- Infill: 100%
- Supports: On
- Layer height: 0.2 mm
- Ironing: Top surfaces
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (16)