Vacuum cleaner / Industrial Vacuum Cleaner Hose Adapter 58mm
Print Profile(1)
Description
I have created an adapter here for a Mirka vacuum cleaner. It connects a 58mm corrugated hose to a 58mm vacuum cleaner connection. It is without an angle, resulting in a very short fit. It is inserted 20mm into the vacuum cleaner (in this case, Mirka) and has a total length of only 84mm. If needed, it can be shortened by another 10mm at the vacuum cleaner insertion side and the hose reception. I printed it in PETG; PLA should work just as well, as would virtually any type of technical filament, but I see no need for technical filaments here. I printed the model with supports to catch the overhangs, and these were easy to remove.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)