Adorable Chibi Sitting Fox

🦊 The cutest fox your machine will print! 🦊

This adorable sitting chibi fox is the perfect blend of cuteness and clever design. With its large head and small body (Chibi/Kawaii style), it has been designed not only to look good, but to be easy to FDM print. It's a perfect print project for beginners and experts alike.

✨ Main Features:

• Adorable Chibi/Kawaii Style: Large expressive eyes and simplified details that make it irresistible.
• FDM Optimized Design: The geometry has been refined to minimize difficult overhangs.
• Low Support Requirement: Most angles are self-supporting. Only a small amount of support (tree type) is recommended for the area directly under the chin and under the tail for a perfect print.
• Large Adhesion Base: The wide seating surface ensures the model stays firm on the bed, reducing warping.

🎨 Print Settings Tips:

• Material: PLA (bright orange, matte white, or even silk filament).
• Layer Height: 0.16mm or 0.2mm (0.16mm for better facial details).
• Infill: 15-20% (Gyroid for a strong pattern).
• Walls/Perimeters: 3 perimeters for better surface quality.
• Adhesion: The base should be sufficient, but if your bed is problematic, use a 3-5mm brim.
• Supports: Use "Tree Supports" for the chin and tail, and configure them for "Manual Supports" to place only where needed.

📦 Included Files:

• Chibi_sitting_fox_Optimized.stl (Main model).
• Coming soon: Pre-configured print profiles (.3mf).

💖 Share your print! I would love to see your versions! If you print this fox, please upload a photo of your result. Your "makes" help me keep creating models.