Combination Square Holder - Multiboard

📐 Holder for Combination Square / Adjustable Square – Multiboard

Holder designed to store combination squares or adjustable squares in Multiboard systems.
It allows keeping the tool organized, always accessible and well-positioned on the board.

The fitting was designed to hold the square firmly, making it easy to both remove and reinsert the tool into the holder.

Ideal for workshops, woodworking benches, 3D printing, or any space that uses Multiboard for tool organization.

🔧 Installation
Compatible with Multiboard system
Direct attachment to the Multiboard panel with a T-screw (present in the 3mf file)
There might be some difficulty inserting the screw, I recommend applying a little grease.

🧵 Printing Recommendations
Suggested material: PETG or PLA
Infill: 15%
Layer height: 0.20 mm
Walls: 2 perimeters
Orientation: follow 3mf model
Supports: not necessary

⚠️ Important Notes
Final strength depends on the material used, print settings, and print quality.
Not recommended for impacts or excessive loads.
Designed to store standard size combination / adjustable squares.

This model is ideal for those seeking practical organization, fast printing, and better utilization of the Multiboard system.