Serviceable FEP Frame – Anycubic Photon Mono
Print Profile(1)
Description
Boost Me (for free)
Boost this model to support independent makers! Your boost = more free designs coming your way.
I designed a replacement FEP frame for the Anycubic Photon Mono because original replacements are becoming difficult to find and many existing designs online are not very reliable.
This version is fully serviceable, meaning you can easily replace the FEP film without needing a new frame.
The design has been tested on my own printer, and after several iterations it works reliably.
Hardware Required
- 14 × M2.5 heat set inserts
(L4 × OD3.5) - 14 × M2.5 × 6 mm countersunk flat head screws
FEP Installation
- Cut a piece of standard FEP film slightly larger than the frame.
- Place the FEP between the two frame parts.
- Install the screws and tighten them evenly.
- After tightening, trim the excess FEP around the edges.
Installation on the Vat
Mount the assembled FEP frame onto the vat.
Tighten the vat screws in a cross pattern, gradually and evenly.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)