low keycap
Copyright Claim
low keycap
Boost
42
78
8
Print Profile(1)
0.16mm layer, 3 walls, 15% infill
23 min
1 plate
Open in Bambu Studio
Boost
42
78
8
1
233
76
Released
Description
just a simple keycap
lower than other keycap
and has no tilt
plaese print it with 0.1mm layer height
推荐0.1mm层高
you might need to print it slower
打印速度最好调慢点
you need to print like this（I saw a incorrect printing configuration so I add this.）
要像这样打印
有人说fdm不能打键帽？来试试这个！
几百块的i3调好了都能打好
I design this for my KeyTester
Comment & Rating (8)
All
Print Profile
0.16mm layer, 3 walls, 15% infill
I had to rotate the model to get it to print right to get everything right
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
Perfect print
0
Reply
好用，换个矮键帽的不容易误触了。
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.16mm layer, 3 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld