Search models, users, collections, and posts
Print Profile(5)
1 hold, 10x3mm magnet, 0.08mm layer, fuzzy skin
Designer
45 min
1 plate
1 hold, 12x2mm magnet, 0.08mm layer, fuzzy skin
Designer
45 min
1 plate
20 holds (1 route), 10x3mm magnet, 0.08mm layer, fuzzy skin
Designer
12.5 h
1 plate
0.08mm layer, 2 walls, 15% infill
4.7 h
1 plate
Click to see more
Open in Bambu Studio
Boost
10
27
2
3
21
12
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Bambu Filaments
Select all
Description
Turn your fridge into a tiny IFSC speed climbing wall.
The model includes a magnet hole on the back.
You will need a small amount of glue to secure the magnet in place.
This model is parametric, you can change it to fit different magnet sizes and scale the hold up or down.
What can you change?
Download the Fusion 360 design file, open it, then go to Solid → Modify → Change Parameters to customize it.
Parameters
| Parameter | Default Value | Description |
| scale | 0.3 | Hold scale |
| magnet_diameter | 10.2 mm | The magnet diameter (add a bit of clearance, usually 0.2 mmm, for an easier fit) |
| magnet_height | 3 mm | The magnet thickness |
Printing recommandations
- Use 0.08mm or 0.12mm layer height for best results, as the model includes many rounded surfaces and gentle slopes.
Enable the Fuzzy Skin setting in your slicer for a more realistic hold texture.
Recommanded settings:
- Fuzzy Skin Mode: Contour
- Fuzzy Skin Point Distance: 0.4mm
- Fuzzy Skin Thickness: 0.2mm
Display recommandations
- You will need 20 holds if you want to recreate the full IFSC official speed route.
- Please do not tilt your fridge to reproduce the 5° overhang, even if it's tempting.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (2)