Eufymake E1: Universal-JIG BIG Hole Grid

A universal holder with a hole grid - Universal-JIG / Print material holder

This version is for the large print bed.
You can find my alternative version for the small print bed here:
https://makerworld.com/de/models/2508756-eufymake-e1-universal-jig-universal-grid-pattern#profileId-2758672

Attention: The print size only fits H2 printers!

This hole grid print plate is for larger objects.
For all parts that need to be printed quickly, but need to be precisely aligned and cannot simply be placed on the print bed.

Once aligned and calibrated, the print bed should deliver repeatable print results.

Here's how:

Place your objects on the hole grid print plate.
Fix them with the small holders (print as many as you need)

Place the hole grid plate on the large print bed of the Eufy.
Use the universal stop to align the plate precisely.
With the universal stop in place, prints should always be repeatable.

Remove the universal stop, only the hole grid plate remains on the printer.
When removing the stop, do not move the hole grid plate!

Print!

Tip:
For alignment, you can easily create a line grid with Corel-Draw, Inkscape or another program and print it directly onto the hole plate, then you can align your objects to it later.
Use zero point calibration, not photo calibration!