Parametric Rail Picatinny 40-200mm Slot Honeycomb Fishbone Rail Airsoft Rifle Water Bullet Pistol Foam Dart
Print Profile(1)
Description
Boost Me (for free)
Your free likes and boosts will motivate me to create even harder
If there are no requirements for the mounting hole spacing, you can print directly If the mounting hole spacing or base width and height are not suitable, you can click the "Customize" button
Hint:
① A5 must be smaller than A1
② A2 determines the radius size of the mounting hole For example, the mounting hole size for M3 screws is set to 1.6mm and the mounting hole size for M4 screws is set to 2.1mm (i.e. it should be larger than the screw radius)
③ When the A1 size is set to 60 or below, the mounting hole round slot will be changed to a round hole, which is determined by the expression
④ All values can be entered manually in addition to being dragged through the slider
Hint:
The value of A5 must be smaller than that of A1
② A2 determines the radius size of the mounting hole. For example, the mounting hole size for M3 screws is set to 1.6mm, and the mounting hole size for M4 screws is set to 2.1mm (i.e., it should be larger than the screw radius)
③ When the A1 size is set to 60 or below, the installation hole round slot will be changed to a round hole, which is determined by the expression
④ All values can be entered manually in addition to being dragged through the slider
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)