Samsung s25 FE Case
Print Profile(1)
Description
I searched a lot for a case for my s25 FE (SM-S731B/DS), but the models I found were not the same as mine; they were all much smaller.
So I decided to create my own design, following some ideas I found here.
The measurements turned out great, it fits very firmly, and with the detail at the bottom, it's easy to remove whenever you want.
I printed it in PETG to make it more resistant, but there shouldn't be any issues with PLA.
You might want to remove some burrs, but it can even be used right out of the printer. I cleaned some corners with a small file and used sandpaper on the corners of the back to improve hand contact. It turned out very well.
And finally, I used a layer of PLA at the beginning to improve the appearance of the back. This layer will be discarded and acts only as a support. I thought the finish looks nicer this way, providing more contrast with the exposed infill. If this is an issue, let me know, and I will try to upload another profile without the PLA support.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (4)