Hello. When you drive indoors, of coarse you can print it in pla. It should even be faster and look even better in pla.

Fatih19

do I have to change any print settings or just hit the print button (new to printing ) 

user_2985057856

Please change only the material to PLA.
The settings have to stay, because you need Supports to print the model.

I drive most of my cars indoors can I print this in pla ?

Thank you so much for the nice feedback! Have a lot of fun with it!

Nag13111

Olli

0.28mm layer, 2 walls, 15% infill

Hallo. das muss ich noch recherchieren. Hab bitte etwas Geduld

Hello I still need to research this Please be patient

Hallo.
Sorry für die lange Wartezeit auf die Antwort. Ich hatte leider kaum Zeit.
Zu der Frage: Das passt leider nicht auf den MN82S, da dieser keine normale Ladefläche hat. Mein Modell ist an die Ladefläche angepasst.

Hello.
Sorry for the long wait for the answer. Unfortunately, I had very little time.
Regarding the question: Unfortunately, this does not fit the MN82S, as it does not have a normal loading area. My model is adapted to the loading area

StudioLab 3D

这个车要是安稳，这个棚顶的话，在水里跑会不会进水啊？是在后斗里会进水吗？

If this car is stable, will the roof let water in if it runs in water? Will it get water in the back?

user_2789195243

Sekundenkleber

cover

IMG_20260310_085237626_HDR.jpg

IMG_20260310_085246255_HDR.jpg

IMG_20260310_085258215_HDR.jpg

IMG_20260310_085304187_HDR.jpg

IMG_20260310_085310387_HDR.jpg

IMG_20260310_085427775_HDR.jpg

IMG_20260310_085431829_HDR.jpg

IMG_20260310_091745413_HDR.jpg

IMG_20260310_091748369_HDR.jpg

IMG_20260310_091753605_HDR.jpg

IMG_20260314_095218889_HDR.jpg

IMG_20260314_095225611_HDR.jpg

IMG_20260314_095230798_HDR.jpg

IMG_20260314_095237103_HDR.jpg

IMG_20260314_095243066_HDR.jpg

IMG_20260314_095247303_HDR.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

8068f6c6b371c290.jpg

Screenshot 2026-03-04 100954.png

Screenshot 2026-03-04 101010.png

Screenshot 2026-03-04 101022.png

Screenshot 2026-03-04 101050.png

Screenshot 2026-03-04 101100.png

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

MN82 Toyota Landcruiser Clip-on Cargo Area Cover

MN82 Toyota Landcruiser Laderaumhaube zum stecken

Hier ist nun die verbesserte Version meiner ursprünglichen Laderaumabdeckung.&nbsp;Die Halteclips sind nun angepasst, sodass sie stabiler sind.Ein Dachträger wurde hinzugefügt und die Optik wurde leicht angepasst.&nbsp;Wer eine schöne Laderaumhaube für seinen MN82 Toyota Landcruiser Modell sucht, könnte das Modell hier schön finden.Es wird mit der Rückseite auf der Druckplatte gedruckt, da auf der Vorderseite die Clips zur Befestigung am Modell sind.Der Bügel wird einfach von hinten an den bestehenden Bügel des Landcruiser angesteckt.Die hinteren Clips umklammern die Seitenteile des Laderaumes.&nbsp;Idealer Weise sollte das Bauteil in PETG, ASA oder ABS gedruckt werden, da man den Landcruiser sicher draußen fahren möchte.Die Scheiben aus PETG und der Dachträger müssen angeklebt werden, idealer Weise mit Sekundenkleber.&nbsp;Viel Spaß damit!

Here is the improved version of my original cargo bed cover.<p&nbsp;The mounting clips have now been adjusted to be more stable.A roof rack has been added and the appearance has been slightly adjusted.<p&nbsp;Anyone looking for a nice cargo bed cover for their MN82 Toyota Landcruiser model might like this model.It is printed with the back side on the print bed, as the clips for attachment to the model are on the front.The bar is simply attached from behind to the existing bar of the Landcruiser.The rear clips grip the side panels of the cargo area.<p&nbsp;Ideally, the part should be printed in PETG, ASA or ABS, as you would surely want to drive the Landcruiser outdoors.The PETG windows and the roof rack must be glued, ideally with superglue.<p&nbsp;Have fun with it!

Print Profile(1)

Bill of Materials

Description

Comment & Rating (15)

This remix is based on

License

Related Models