Dual element racing wing
Print Profile(1)
Description
This is the wing I've been working for my corvette track car, it has a 13-½" chord and a span of 74". This is built from segmented ASA-CF prints with solid PPA-CF support sections. The segments of the main wing element are mounted to a pair of 38MM carbon fiber tubes for support. I bonded everything together with West Epoxy Systems and 404 high density filler, after the prints are bonded to the carbon tubes the whole wing is wrapped in carbon twill in a vacuum infusion or wet layup.
The end caps of the wing are designed to fit 10-32 threaded heat set inserts to mounts whatever end plates you decide to go with.
If you're only building the main wing element you will only require the first 4 items on the material list. Material list is in the last photo, you need more than 1 tube to span the length of the wing and that's reflected in the quantities. The tubes “telescope” inside each other hence the different sizes.
If you build this you MUST test the tolerance between the carbon tubes you are using and the printed parts before making the entire thing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (17)