Vintage Goose Fridge Magnet

🪿 Description

Vintage Goose fridge magnet inspired by the T & T Designs Vintage Goose keychain. I scaled the model down to a smaller size, sliced it in half, and added a negative cavity sized for an 8 mm × 3 mm magnet, inserted at layer 20. Printed at 0.16 mm layer height with a 0.4 mm nozzle and 5% infill.

🛠️ Print Settings

• Layer Height: 0.16 mm
• Nozzle: 0.4 mm
• Infill: 5%
• Supports: Not required
• Walls: 2–3 recommended
• Material: PLA works great
• Pause Layer: Layer 20 for magnet insertion (8 mm × 3 mm magnet)

🔧 Remix Notes

• Scaled the original goose design down
• Sliced the model in half to create a flat back suitable for fridge or locker use.
• Added a clean negative cavity sized for an 8 mm × 3 mm round magnet.
• Designed the cavity depth so the magnet sits flush once inserted mid‑print.
• Inspired by the T & T Designs Vintage Goose keychain but rebuilt for a different purpose and print style.

🧾 Credits

• Original Model: Vintage Goose Keychain by T & T Designs
• This Remix: Scaled, sliced, and modified to include a magnet cavity for fridge use.