Tame Impala "Currents" Album - Hueforge Art
Print Profile(1)
Description
Boost Me (for free)
Most of my Hueforges don't get a lot of downloads, so I make most of my points through boosts. I super appreciate any boost, It helps me continue making Hueforges. 😁 Thanks
Hueforges can be resized if you only change the X and Y scale, and leave the Z height the same.
Hueforge art of the album “Currents” by Tame Impala (2015)
Project: Tame Impala Currents.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x133.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Purple Transmission Distance: 5
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Purple
At layer #14 (1.2mm) swap to Orange
At layer #16 (1.36mm) swap to Jade White for the rest.
Collection getting to BIG?
Check out my Hueforge poster storage bin!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)